Sturdy Motor Pinion Gear Puller Remover Tools Set Metal for RC Helicopter

Description:
Package: Including 1 Puller Remover Tool and 5 pins for motor shaft diameter 0.9mm (cylindrical), 1.75mm (semicircle), 1.75mm (cylindrical), 1.9mm (cylindrical), 2.8mm (semicircle).
Fitment: Suitable for motors of RC helicopter, plane, etc.
Firstly: Choose the thimble you need to pull, plug in the rotation lever, tighten the screws (Note: There are thimbles with platform, screws should not too tight)
Then: Install the gear lever into the rotation bracket and fitted swim boards. Snapping the motor into the swimming board, and move to pull the motor shaft aligned thimble
Finally: Rotate the gear puller action lever clockwise at a constant speed, and pull out the gear. Gears with a maximum outer diameter of 11mm and a height within 12mm can be pulled.
Specification:
Product Size:
Base: Length 5cmx1.42cm/1.97inchx0.56in; Height 3.5cm+3.5cm/1.38inch+1.38inch
Material: Metal
Package Includes:
1 Puller Remover Tool
5 Pins
Note:
Please allow slightly errors due to manual measurement and different monitors.